Holtkoetter 6319 User Manual download pdf

Holtkötter

& Holtkötter Leuchten

are registered trademarks

HOLTKÖTTER INTERNATIONAL, INC.

155 Hardman Avenue South, South St. Paul, MN 55075

fax: (888) 552-8661 • phone: (800) 899-5444

www.holtkoetter.com

e-mail: [email protected]

ASSEMBLY INSTRUCTIONS FOR

Halogen Pharmacy Lamp

6319/1

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.

Bulbs manufactured in Germany by Osram GmbH.

Final assembly by Holtkötter International, Inc. in South St. Paul, MN.

Please make sure that the following parts for your lamp are enclosed:

A. Reflector

B. Aluminum Ring (attached to lamp)

C. Glass Shield

D. Allen Wrench (packed inside bulb box)

E. Large Washer (2 each, already installed)

F. Handle with plastic protector

G. Small Plastic Washer (attached to reflector)

H. Small Plastic Nut (attached to reflector)

I. Bayonet Base Halogen Bulb

J. Table Lamp

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth may be used to

spot clean.

Do not use common household cleaners or brass cleaners on lamps or fixtures, as the

lacquer on the outside of the brass may be damaged as a result.

Enjoy your new Holtkötter lamp.

Bulb & Reflector Installation

Step 2. Loosen the set screw with

the allen wrench (D). Then

unscrew the aluminum ring (B) from

the lamp arm. Remove one of the

large washers (E).

(D)

(E)

(B)

set screw

Step 1. The brass arms are

made of soft, high-quality brass

that is pliable and may be bent

from shipping. If necessary, apply

pressure to straighten.

Step 3. Slide the reflector (A) over

the socket. Place the large washer (E)

that was removed back onto the

socket. Screw the aluminum ring (B)

back onto the socket until it is tight.

Tighten the set screw on the aluminum

ring into place. DO NOT OVERTIGHTEN.

MAKE SURE THE REFLECTOR IS STILL

LOOSE ENOUGH TO TURN.

(A)

(E)

Step 4. Put the 100-Watt halogen

bulb (I) into the socket. Hold the bulb

at the porcelain grip, push it down

slightly and turn it clockwise. BE

CAREFUL NOT TO TOUCH THE BULB

ENVELOPE WITH YOUR BARE HANDS.

Note of Caution: The recommended replacement

bulbs for this fixture are 100 W Osram Bayonet Base

Halogen bulbs. Use of other brands of unknown

quality may cause a risk of overheating.

(I)

Step 5. Align the glass shield (C) with

the small screw extending from the

bottom of the socket. Place the small

washer (G) and the small plastic nut

(H) over the screw and finger tighten.

(C)

(G)

(H)

Step 6. Next, screw on the handle (F)

and finger tighten. DO NOT

OVERTIGHTEN – THE GLASS SHIELD MAY

CRACK UNDER TOO MUCH PRESSURE.

Step 7. Plug the lamp cord into the

wall outlet. Your lamp is now

operational.

(F)

Summary of Contents

Page 1 - Halogen Pharmacy Lamp

Comments to this Manuals

No comments

Holtkoetter 6319 User Manual

Browse online or download User Manual for Lighting Holtkoetter 6319. Holtkoetter 6319 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Holtkoetter 6319