Holtkoetter 6243 User Manual download pdf

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

e-mail: customerservice@holtkoetter.com

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.

Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

and Holtkötter Leuchten

Halogen Table Lamp

No. 6243

Your lamp comes fully assembled with the bulbs and glass shields in place. After installation of

the glass shade, your lamp will be fully operational. Please make sure that the following parts for

your lamp are enclosed:

A. Lamp

B. Bulb (60 Watt Xenon - Clear, 2 each)

C. Glass shields (2 each)

D. Glass shade

INSTALL THE GLASS SHADE

1. Located at the top of the column is a finished cap that is

held onto the column with a spring clip. Remove this finished

cap by pulling it upwards.

2. Underneath the finished cap is a small screw ring that is

used to hold the glass shade in place. Turn this small ring

counterclockwise to remove.

3. Place the center hole of the glass shade over the column

and tighten the screw ring over the glass. Put the finished cap

on the glass shade and press into place. Your lamp is now

operational.

CHANGE THE SHIELD

1. The glass shield is held in place with a spring clip on

each side. To remove it, pull it gently from the clip.

2. To replace it, put one side of the shield in the spring

clip and insert it into the opposite side. NOTE: The glass

shield should cover and rest on the set screw, which is located on the socket.

CHANGE THE BULB

NOTE: BE CAREFUL NOT TO TOUCH THE BULB ENVELOPE WITH YOUR BARE HANDS.

1. Remove the glass shield.

2. Unscrew the old bulb and replace it with a new bulb, being careful not to touch the bulb

with your bare hands.

3. Replace the glass shield.

CARE INSTRUCTIONS

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth may be used to spot

clean. Do not use common household cleaners or brass cleaners on lamps or fixtures, as the

lacquer on the outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.

CAUTION, IMPORTANT SAFETY INSTRUCTIONS

This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to

reduce the risk of electrical shock. This plug will fit a polarized outlet only one way. If the plug does

not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC

SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION OR

INJURY TO PERSONS

WARNING - To reduce the risk of FIRE, ELECTRIC SHOCK,

EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO

PERSONS:

1. Turn off power/unplug and allow to cool before replacing bulb.

2. Bulb gets HOT quickly. Contact only switch/plug when turning on.

3. Do not touch hot lens, guard or enclosure.

4. Do not remain in light if skin feels warm.

5. Do not look directly at lighted lamp.

6. Keep lamp away from materials that burn.

7. Use only with a 60 Watt or smaller bulb.

8. Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.

9. Do not operate the portable luminaire with a missing or damaged guard, lamp containment

barrier or UV filter.

SAVE THESE INSTRUCTIONS

Halogen Table Lamp 1
No. 6243 1

Summary of Contents

Page 1 - No. 6243

205 Hardman Avenue South, South Saint Paul, MN 55075Voice: (800) 899-5444 • Fax: (888) 552-8661e-mail: [email protected]

Comments to this Manuals

No comments

Holtkoetter 6243 User Manual

Browse online or download User Manual for Lighting Holtkoetter 6243. Holtkoetter 6243 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Holtkoetter 6243